Thermia Aura

Thermia Aura is an air-to-air heat pump with inverter technology that offers you high-performance thanks to its unique technical solutions. With a seasonal coefficient of performance (SCOP) of 5.1* (Aura T2) and 4,6* (Aura S2), Aura enables you to reduce energy consumption by up to 75%.

SCOP is a measure that describes how efficiently a heat pump works over a full year, including warm and cold periods. It indicates the relationship between the amount of energy produced and the amount consumed. The higher the value, the better the system.

* average climate,  heating according to EN14825

Thermia Aura is an air-to-air heat pump with inverter technology. The inverter-controlled compressor constantly adjusts the heat load according to current heat demand. You never use more energy than is needed, further reducing your energy bills.

Thermia Aura has two available models:

• Aura T2 with 7,3 kW heating and 4,8 kW cooling capacity
• Aura S2 with 7,0 kW heating and 3,5 kW cooling capacity

Both Aura’s are available in 230V single-phase versions.

The design of the indoor units is compact and stylish. The depth of the indoor unit at only 21.5 cm also makes it easier for it to blend in with the room. At just 21.5 cm in depth, the indoor unit is easy to install and can blend discreetly into any design scheme.

At Thermia, we are committed to healthier lifestyles and to reducing our environmental footprint. That’s why our air source heat pumps have been increasingly adopting the more eco-friendly R32 refrigerant.

The R32 refrigerant represents innovation in every way. It is an excellent heat transfer medium that leads to greater energy efficiency and cost-effectiveness. R32 also has low global warming potential (GWP), making it friendlier to the environment.

e.

Air-to-air heat pumps transfer heat from the outside air to air inside your home, increasing the temperature of the air in each room. This warm air enters your home through a series of fan coil units.

The Aura supply heating temperature varies from 8 °C up to 30°C. Temperature control is fast and the heat is distributed evenly in the room. This is achieved by an increased airflow and up to 15 meters of thermal reach.

The size of the fan in the indoor unit is larger than normal to create improved circulation, a longer throw length and faster spreading of the warm or cool air than normal.

Thermia Aura heat pumps offer a low-carbon alternative to traditional boilers, whether for new-builds or refurbishments.

The heat pump provides heat during the winter while in the summer the process can be simply reversed. The heat pump now collects heat from the house and – via a refrigeration process and compressor (the same technology used in your refrigerator) – removes it to provide cooling.

The built-in air-conditioning function in Aura means that you can enjoy comfortable cooling indoors at a low cost during the warmer months of the year.

The controller coordinates and controls the heating temperature and airflow. Thermia heat pumps work with complete precision to give your home the best possible indoor climate at the lowest possible cost. Our controller is very easy to use.

Aura also features a maintenance heating function with a step-less setting from +8°C. This enables you to save energy when you are away from home.

The design of the indoor unit makes the Aura both very efficient and quiet.

Its innovative mechanical design makes Aura one of the quietest heat pumps on the market. Operational sound levels for the Aura indoor unit vary from 18 dB(A) up to 40 dB(A), depending on model and fan speed.

Aura T2 is equipped with a three-layer filter system, which removes particles in your indoor air.

During winter operation, an air source heat pump extracts energy from the cold outside air and releases the heat into the living space. Under certain outside air conditions, when the pump is operating in heating mode, frost can form on the air-cooled heat exchanger, decreasing heating performance. Defrosting an air source heat pump is essential to ensure the functionality of the system. However, defrosting always consumes energy and should only be performed when and for as long as needed.

In standard systems, a typical defrosting cycle is based on a timer function. In contrast, Thermia’s defrosting of the outdoor unit is automatic and demand-controlled. It is only activated when it is needed and only for as long as necessary. This minimizes the energy consumption required to keep the outdoor section of the system free of ice. The result is improved annual efficiency.

Aura T2 and Aura S2 have Wi-Fi as standard, which enables the heat pump to be remotely controlled via the Thermia app.

Aura T2 and S2 is one of the products that have been selected to be part of SmartThings – a system that connects different smart devices in home and gives customer the opportunity to control them via an app. Read more about SmartThings

Thermia heat pumps are tested in one of the harshest climates in Europe. Swedish winters can be extreme. February is usually the coldest month, with temperatures regularly below zero, and heating is essential from September to May. The Aura has been proven and tested in the cold, Nordic climate and features a variety of functions that can provide the perfect level of comfort for your home, for years to come.